FABRICANTS
|
|
Nos nouvelles pompes de série d'es sont des pompes à économies d'énergie, à rendement élevé, entièrement submersibles et conçues pour l'entrepreneur professionnel de tuyauterie.
Les pompes de série d'es consomment moins d'énergie tout en fournissant un plus grand écoulement de pompe et une exécution globale. Économiser sur les coûts énergetiques tout en conservant l'énergie tel est notre point de vue. Les pompes de série d'es sont conçues, fabriquées et examinées selon les normes exigeantes de Little Giant.
|
554200
80 GPH - Automatic Condensate Removal Pump w/ safety switch, 6' power cord | Low profile for limited space applications | | 1/30 HP motor | | ABS tank, motor cover, and volute | | 3/10 gallon tank capacity | | Stainless steel shaft | | Removable 3/8” barbed check valve | | Thermal overload protection | | Safety switch | | UL / CSA listed |
| Item Number: 554200 | | Model Number: VCC-20ULS |
| 554210 80 GPH (4.9 LPM), 230V - VCC-20ULS
Automatic Condensate Removal Pump w/ safety switch, 6' (1.8m) power cord | Low profile for limited space applications | | 1/30 HP motor | | ABS tank, motor cover, and volute | | 3/10 gallon tank capacity | | Stainless steel shaft | | Removable 3/8” barbed check valve | | Thermal overload protection | | Safety switch | | UL listed |
|
|
- Medium Reservoir : 1/2 Gal.
554451
 Automatic Condensate Removal Pump - VCMA Series
The company that has always been the forerunner in condensate removal pump design introduces the new generation VCMA Series. Adding features for every installation with guaranteed serviceability and unmatched reliability, Little Giant once again defines state-of-the-art in pump design. | 1/30 HP high performance motor | | ABS tank, motor cover, and volute | | 1/2 gallon tank capacity | | Stainless steel shaft | | Removable 3/8” barbed check valve | | 3 inlet drain holes | | Thermal overload protection | | UL / CSA listed |
| |
|
EC SERIES 553450
 4 GPH (15.14 LPM), 230V - Electronic Condensate Removal Pump
Electronic Condensate Pump
The EC-400 is a complete pumping system designed to remove condensation from wall mounted, ceiling and fan coil split air conditioning equipment when gravity drainage is not possible. The EC-400 consists of 2 components: pump/control unit and reservoir. The compact two-piece design allows for easy installation in most systems. Both components can be placed into the air handler or the pump/control can be placed up to 1,0m above the air handler in the ceiling void or inside trunking conduit. A three-position symmetrical float sensing system assures reliable ON, OFF and SAFETY ALARM functions. Intake tubing, tube clamps, adhesive tape, vent, and a/c drain tubing included.
| Fully Automatic: Start, Stop, Overflow Detection (For alarm or equipment shut-down) | | Compact two-piece design for quick and flexible installation | | Pump is self priming and can be placed inside air handler of located up to 1,0m above reservoir | | Reservoir Connects to 13-17mm Condensate Drain | | Maximum Flow: 14 l/h (3.7usgph) | | Maximum Head: 12m (39ft) | | Design Operating Point: 6 l/h at 4,0m (1.6 usgph at 13.1 ft) | | Use with Air Conditioning Equipment up to 10kW (30,000 BTU) (4 kW in tropical areas) | | Reservoir Vent with Tube Included | | Thermally Protected Motor | | Pump Outlet Designed for 4x6mm (5/32" ID) Tubing | | TÜV approved | | Suction tubing: 1m x 4mm (3'x5/32" ID), Vent tubing: 150mm x 4mm (8" x 5/32" ID), Drain tubing: 75mm x 13mm (3" x 1/2" ID) |
| | | | Product Specifications | | Spec Sheet | | O&M Manual |
|
| | Item Number: 553450 | | Model Number: EC-400 |
|
| PC SERIES
553673
10 LPH, 230V - Peristaltic Condensate Removal Pump, 6.5' (2m) power cord
Designed to quietly, efficiently, and automatically remove condensate
water from air conditioners and refrigeration equipment.
Product Specifications
O&M Manual
Secondary O&M Manual
Item Number: 553673
Model Number: PCR-10S
| |
|
